MOTU UltraLite-mk3 Hybrid Betriebsanweisung PDF herunterladen (Seite 75)

CUEMIX FX

Output reverb send/return

The output reverb send (Figure 11-6) feeds the

signal for the output to the UltraLite-mk3’s global

reverb processor, where it is merged with any other

signals being fed to the reverb. The reverb’s output

can then be fed back into the mixer at various

return points, including the same output from

which it was sent (discussed below). The output

reverb send is disabled (grayed out) when the

reverb Split Point is set to Mix to eliminate the

possibility for feedback loops created by reverb

send/return loops. See “Split point” on page 89.

The output reverb return (Figure 11-6) feeds the

output of the UltraLite-mk3’s global reverb

processor directly to the output. This includes any

other signals currently being fed to the reverb.

Both the send and return occur after EQ and

dynamics processing, but before listenback and

talkback.

Talkback/Listenback

Click the Ta lkback or Listenback buttons

(Figure 11-6) to toggle whether the output pair is

included in the Talkback or Listenback group. See

“Talkback and listenback” on page 91.

Monitor group assign

Click the Monitor buttons (Figure 11-6) to toggle

whether the output pair is included in the Monitor

group. See “The Monitor Group” on page 90.

Figure 11-6: The Outputs tab.

Output name

Channel focus

Outputs tab

EQ band selectors

LP/HP ﬁlter selector

Compressor selector

EQ/Dynamics graph

EQ/Dynamics controls

EQ/Dynamics

enable/disable

Output reverb

send/return

Talkback/listenback

enable/disable

Monitor group assign

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 117 118

Kommentare zu diesen Handbüchern

Keine Kommentare

MOTU UltraLite-mk3 Hybrid Betriebsanweisung Seite 75

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Aufnahmegeräte MOTU UltraLite-mk3 Hybrid