MOTU UltraLite-mk3 Hybrid Betriebsanweisung PDF herunterladen (Seite 69)

CUEMIX FX

CUEMIX FX BASIC OPERATION

Here is a brief overview of the CueMix FX mixer.

Eight stereo mix busses

CueMix provides eight stereo mix busses: Bus 1,

Bus 2, Bus 3, and so on. Each mix bus can take any

number of inputs and mix them down to any

UltraLite-mk3 output pair that you choose. For

example, Bus 1 could go to the headphones, Bus 2

could go to the main outs, Bus 3 could go to a piece

of outboard gear connected to analog outputs 7-8,

etc.

Many inputs to one output pair

It might be useful to think of each mix bus as some

number of inputs all mixed down to a stereo output

pair. CueMix FX lets you choose which inputs to

include in the mix, and it lets you specify the level,

pan and other input-speciﬁc mix controls for each

input being fed into the mix.

Viewing one mix bus at a time

CueMix FX displays one mix bus at a time in the

Mixes tab (Figure 11-2 on page 70). To select which

mix you are viewing, choose it from the mix bus

menu (Figure 11-2). The mix name appears above

the mix bus master fader (Figure 11-2), where you

can click the name to change it.

Each mix bus is independent

Each mix bus has its own settings. Settings for one

bus will not affect another. For example, if an input

is used for one bus, it will still be available for other

busses. In addition, inputs can have a different

volume, pan, mute and solo setting in each bus.

Input channels

The Inputs tab (Figure 11-3 on page 72) gives you

access to settings for individual UltraLite-mk3

inputs (or input pairs), such as phase, trim, EQ and

dynamics processing. Each input also includes a

send to the UltraLite-mk3’s global reverb

processor. These settings are applied to the signal

before it goes anywhere else (to a mix bus or the

computer).

Output channels

The Outputs tab (Figure 11-6 on page 75) gives you

access to settings for each UltraLite-mk3 output

pair, including EQ, dynamics processing and

send/return controls for feeding and returning the

output signal to/from the UltraLite-mk3’s global

reverb processor. These settings are applied to the

signal just before it is sent to the output.

Channel focus and settings

Click the focus button for a channel (Figure 11-1)

to view channel-speciﬁc parameters in the Channel

Settings section of the CueMix FX window

(Figure 11-1). Separate tabs are provided for

channel-speciﬁc settings (channel strip, EQ and

dynamics), plus the global meter bridge and reverb

processor.

Global reverb processor

The UltraLite-mk3 has a global reverb module

(Figure 11-28 on page 89). Once it has been

activated, you can feed signals to the reverb

processor from various points in the

UltraLite-mk3 mix matrix via input sends, bus

sends and output sends. Stereo output from the

reverb processor can then be fed back to mix

busses or output pairs using reverb returns.

Other features

CueMix offers many additional features, discussed

in this chapter, such as talkback/listenback,

extensive metering, graphic editing of certain

effects parameters, monitor grouping and more.

Widening the CueMix FX window

To view more input faders at once, drag the grow

box (Figure 11-1) to the right.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 117 118

Kommentare zu diesen Handbüchern

Keine Kommentare

MOTU UltraLite-mk3 Hybrid Betriebsanweisung Seite 69

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Aufnahmegeräte MOTU UltraLite-mk3 Hybrid