MOTU UltraLite-mk3 Hybrid Betriebsanweisung PDF herunterladen (Seite 11)

ABOUT THE ULTRALITE-MK3 HYBRID

All ten analog outputs and six quarter-inch analog

inputs are on balanced TRS +4dB quarter-inch

jacks. All of these jacks can also accept unbalanced

plugs.

Precision Digital Trim™

All of the UltraLite-mk3’s analog inputs are

equipped with digitally controlled analog trims

that allow adjustments in 1 dB increments. The

mic/guitar input trims can be adjusted using front-

panel digital rotary encoders that provide feedback

in the front panel LCD with 60 dB of adjustment

for the mic input and 32 dB for the TRS input. All

analog inputs, including six rear-panel TRS analog

inputs, can be trimmed using the front panel LCD

or using the UltraLite-mk3’s included CueMix FX

control software for Mac and Windows. This allows

you to ﬁne-tune trim settings for synths, effects

modules and a wide variety of analog inputs for

optimum levels. Different trim conﬁgurations can

then be saved as ﬁles on disk for instant recall.

S/PDIF

The UltraLite-mk3 rear panel provides RCA “coax”

S/PDIF input and output.

MIDI I/O

The UltraLite-mk3’s standard MIDI IN and MIDI

OUT jacks supply 16 channels of MIDI I/O to and

from the computer via the UltraLite-mk3’s

FireWire connection. Timing accuracy can be

sample-accurate with host software that supports

it.

On-board SMPTE synchronization

The UltraLite-mk3 can resolve directly to SMPTE

time code via any analog input, without a separate

synchronizer. It can also generate time code via any

analog output. The UltraLite-mk3 provides a

DSP-driven phase-lock engine with sophisticated

ﬁltering that provides fast lockup times and sub-

frame accuracy.

The included MOTU SMPTE Console™ software

provides a complete set of tools for generating and

regenerating SMPTE time code, which allows you

to slave other devices to the computer. Like

CueMix FX, the synchronization features are

cross-platform and compatible with any audio

sequencer software that supports the ASIO2

sample-accurate sync protocol.

Hybrid FireWire/USB2 connectivity

FireWire has long been recognized as a reliable,

high-performance connectivity standard for

professional MOTU audio interfaces. Meanwhile,

hi-speed USB2 has also developed into a widely

adopted standard for connecting peripheral

devices to personal computers.

To fully support both formats, your UltraLite-mk3

Hybrid audio interface is equipped with both a

FireWire A (400 Mbit/sec) connector and a hi-

speed USB2 (480 Mbit/sec) connector, and you can

use either port to connect the UltraLite-mk3 to

your computer. This gives you maximum ﬂexibility

and compatibility with today’s ever-expanding

universe of Mac and Windows computers.

The UltraLite-mk3 has the ability to power itself

from its FireWire connection to the computer, for

convenient, mobile bus-powered operation.

Power supply

If you do not want the UltraLite-mk3 to draw

power from the computer, and AC power is

available, you can power the UltraLite-mk3 from

any standard 10-18V, 12 watt DC power supply

with any polarity (tip positive or negative).

THE ULTRALITE-MK3 FRONT PANEL

Mic/instrument input

See “Mic/guitar inputs with preamps” on page 10.

48V phantom power and pad

See “Mic/guitar inputs with preamps” on page 10.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 117 118

Kommentare zu diesen Handbüchern

Keine Kommentare

MOTU UltraLite-mk3 Hybrid Betriebsanweisung Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Aufnahmegeräte MOTU UltraLite-mk3 Hybrid