MOTU UltraLite Betriebsanweisung PDF herunterladen (Seite 69)

NETWORKING

■ All computers and interfaces on the network

have full access to each other.

■ MOTU employs a 1 Gbit AVB implementation in

the MOTU AVB Switch. The switch allows routing

of many audio channels on the network.

SETTING UP A MOTU AVB INTERFACE FOR

NETWORKING

Depending on the model, MOTU AVB interfaces

have the ability to broadcast up to sixteen

8-channel streams to the rest of the network.

Conversely, it can “listen” to as many as sixteen

8-channel streams from anywhere else in the

network. The speciﬁc number of streams

supported depends on the model.

For each device on the network, set it up for

network operation as follows:

1 In the MOTU AVB Control web app, choose the

device (item #1 on page 12).

2 Go to the Device tab (item #5 on page 12), go to

the AV B S t r e a m S e t u p section (item #18 on

page 13), and type in the number of 8-channel

input and output streams you want for that device.

3 Go to the AV B S t r e a m C o n n e c t i o n s section (item

#19 on page 13), and choose the network stream

you want the device to listen to for each bank.

4 Use the Routing tab to map speciﬁc I/O

channels within each MOTU AVB interface to its

network input and output streams, as explained in

the next section.

MAPPING AUDIO TO NETWORK STREAMS

Once you’ve conﬁgured a device’s AVB streams, as

explained above, use the Routing tab (page 14) to

map audio channels to network input and output

streams.

Input streams (coming from the rest of the

network) are listed across the top of the routing

grid. Expand the stream and click on the grid to

map incoming network channels to local

destinations, including physical outputs on the

device, computer channels (to a connected

computer), or mixer channels.

Output streams being broadcast to the rest of the

network are listed in rows along the left side of the

grid. Expand each stream bank and map

individual network output channels to local

sources, such as physical inputs on the interface,

channels coming from the computer, or channels

coming from the device’s mixer.

MAPPING COMPUTER CHANNELS TO

NETWORK STREAMS

If a host computer is connected to an interface

(through USB), mapping network input and

output streams is accomplished as described in the

previous two sections. Simply enable AVB streams

as desired, and map them to computer channels in

the Routing grid.

If, while mapping, you run out of computer

channels, enable more in the Computer Setup

section of the Device tab (item #24 on page 13). If

the computer is connected with Thunderbolt (to a

MOTU interface that supports it), you can enable a

maximum of 128 channels in and out. If the

computer is connected with USB, performance will

vary, depending on the sample rate and other

factors.

BRIDGING TO ETHERNET

The Ethernet port on the MOTU AVB Switch

allows you to connect standard network devices,

such as:

■ A Wi-Fi router

■ An Ethernet hub or switch connected to a local

home, studio, or ofﬁce network

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 85 86

Kommentare zu diesen Handbüchern

Keine Kommentare

MOTU UltraLite Betriebsanweisung Seite 69

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Aufnahmegeräte MOTU UltraLite