MOTU UltraLite-mk3 Hybrid Betriebsanweisung PDF herunterladen (Seite 32)

ULTRALITE FRONT PANEL OPERATION

Figure 6-2: In setup mode, the LCD displays a setup parameter in the

top row of the LCD and the current setting in the bottom row.

Mixer mode

In mixer mode, the LCD displays the settings for

the current UltraLite mix being shown in the

display, as demonstrated in Figure 6-1 on page 31.

Parameter “zooming”

For many settings, the LCD temporarily “zooms

in” to display a long-throw meter and alpha-

numeric display to give you precise, real-time

feedback as you adjust the setting. For example, if

you change the headphone volume, the LCD will

display a level meter and gain reduction reading

that updates as you turn the volume knob. After a

brief time-out, the display returns to its previous

state before you turned the volume knob. The

time-out period can be adjusted, as explained later

in the section called “Fader View Time”.

Figure 6-3: For many settings, the LCD “zooms in” on the setting as

you adjust it.

MAIN VOLUME

Tur n in g the MAIN VOL knob lets you control the

volume of the rear-panel main outs. It can also be

programmed to provide master volume control

over S/PDIF output, or 5.1 and 7.1 surround

output via analog outputs 1-6 or 1-8, respectively.

See “Main Volume Assign” on page 33.

As explained in the previous section, the LCD

provides detailed feedback as you turn the knob.

To v i e w t he c u r rent setting without changing it,

just push the knob (without turning it).

POWER SWITCH

Push the MAIN VOL knob to switch on the

UltraLite. Push in and hold the MAIN VOL knob

to turn it off.

PAGE/SETUP

Press the PAGE/SETUP knob to toggle between

mixer mode and setup mode.

In mixer mode, the PAGE, CURSOR and VALUE

knobs let you adjust the on-board mixing features.

See “MIXER” on page 34.

In setup mode, turn PAGE to choose a setting and

turn VALUE to adjust it. Press the VALUE knob to

make the change to a setting. The CURSOR knob is

also used to adjust some of the settings. The setup

mode settings are brieﬂy explained below.

Clock source

This sets the global clock source for the UltraLite

and is the same as the Clock Source setting in

MOTU Audio Setup as explained in “Clock

Source” on page 28. If the UltraLite is currently

connected to a computer, this setting cannot be

changed from the front-panel LCD. It must be

changed in MOTU Audio Setup instead. Or, you

can disconnect the UltraLite from the computer to

change the Clock Source from the front panel.

!UltraLite Manual/Win Page 32 Tuesday, September 13, 2005 7:00 PM

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 67 68

Kommentare zu diesen Handbüchern

Keine Kommentare

MOTU UltraLite-mk3 Hybrid Betriebsanweisung Seite 32

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Aufnahmegeräte MOTU UltraLite-mk3 Hybrid